17Care and cleaning of the microwave oven. GEAppliances.caHelpful HintsAn occasional thorough wiping with a solution of baking soda and water keeps theinside freshUnplug the cord before cleaning any part of this oven.How to Clean the InsideWalls, Floor, Inside Window, Metal and Plastic Parts on the DoorSome spatters can be removed with a paper towel; others may require a damp cloth Removegreasy spatters with a sudsy cloth, then rinse with a damp cloth do not use abrasive cleanersor sharp utensils on oven wallsTo clean the surface of the door and the surface of the oven that come together uponclosing, use only mild, nonabrasive soaps or detergents using a sponge or soft cloth.rinse with a damp cloth and dry.never use a commercial oven cleaner on any part of your microwave.Removable Turntable and Turntable SupportTo prevent breakage, do not place the turntable into water just after cooking. Wash it carefullyin warm, sudsy water or in the dishwasher The turntable and support can be broken if droppedRemember, do not operate the oven without the turntable andsupport in placeHow to Clean the Outsidedo not use cleaners containing ammonia or alcohol on the microwave oven. ammonia oralcohol can damage the appearance of the microwave.CaseClean the outside of the microwave with a sudsy cloth Rinse with a damp cloth and then dryWipe the window clean with a damp clothControl Panel and DoorWipe with a damp cloth dry thoroughly do not use cleaning sprays, large amounts of soap andwater, abrasives or sharp objects on the panel—they can damage it. Some paper towels can alsoscratch the control panelDoor Surfaceit is important to keep the area clean where the door seals against the microwave use only mild,non-abrasive detergents applied with a clean sponge or soft cloth Rinse wellPower Cordif the cord becomes soiled, unplug and wash with a damp cloth For stubborn spots, sudsy watermay be used, but be certain to rinse with a damp cloth and dry thoroughly before plugging cordinto outletStainless Steel (on some models)do not use a steel-wood pad; it will scratch the surface.To clean the stainless steel surface, use a hot, damp cloth with a mild detergent suitablefor stainless steel surfaces use a clean, hot, damp cloth to remove soap dry with a dry, cleancloth Always scrub lightly in the direction of the grain