GE JGBP36 Owner's Manual & Installation Instructions

Also see for EGR3000: Owner's manual and installation instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions

GE JGBP36 Owner's Manual & Installation Instructions Manual pdf 27 page image

The electrode of the spark igniter isexposed when the burner head isremoved. When one burner is turnedto LITE, all the burners spark. Do notattempt to disassemble or cleanaround any burner while anotherburner is on. An electric shock mayresult, which could cause you toknock over hot cookware.If your range is removed for cleaning, servicing or any reason, be sure the anti-tip deviceis re-engaged properly when the range is replaced. Failure to take this precaution couldresult in tipping of the range and cause injury.27GrateBurner headBurner capCooktopBe sure electrical power is off and all surfaces are cool before cleaning any part of the range.Sealed Burner AssembliesTurn all controls OFF before removingthe burner parts and drip pans (if soequipped).The burner grates, caps, burner heads anddrip pans (if so equipped) can be lifted off,making them easy to clean.CAUTION: Do not operate thecooktop without all burner parts, drip pans (on somemodels) and grates in place.Care and cleaning of the range. www.GEAppliances.comDrip pan (onsome models)ElectrodeDrip Pans (on some models)Remove the grates and lift out the drippans. Drip pans can be cleaned in adishwasher or by hand.When replacing the drip pans, make surethey are in the correct position.To get rid of burned-on food, place themin a covered container (or plastic bag)with 1/4 cup ammonia to loosen the soil.Then scrub with a soap-filled scouring padif necessary.CAUTION: Do not clean the drippans in a self-cleaning oven.ElectrodeConsumer SupportInstallation Instructions Troubleshooting TipsOperating InstructionsSafety Instructions