GE JGBP38 Use And Care & Installation Manual

Also see for JGBP34: Owners and installation manual Installation and owner's instructions Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Use and care & installation guide

GE JGBP38 Use And Care & Installation Manual Manual pdf 52 page image

52PROBLEM SOLVER(continued)PROBLEM POSSIBLE CAUSEOVEN CONTROL SIGNALS • This is reminding you to enter a bake temperature (see the Baking section).AFTER ENTERING COOKTIME OR STOP TIMEOVEN DOOR WILL • Oven must cool below locking temperature. Do not lock the door withNOT UNLOCK door latch except when using self-clean feature or the oven may lock.“door” APPEARS • Self-cleaning cycle has been selected but latch handle was not moved all theIN THE DISPLAY way to the right. Move the latch handle.• Latch handle was moved to the right but a program other than self-cleaningwas selected. Move the latch handle to the right only when setting theself-cleaning cycle.OVEN NOT CLEAN AFTER • Oven controls not set properly. See Operating the Self-Cleaning Oven section.CLEAN CYCLE • Heavily soiled oven requires 31⁄ 2 to 4 hours of cleaning time.• Heavy spillovers should be cleaned up before starting clean cycle.CLOCK DOES NOT WORK • Range electrical plug must be securely seated in a live power outlet. Check forblown fuse or tripped circuit breaker.NIGHT LIGHT DOES • Fluorescent bulb is loose or defective. Adjust or replace.NOT WORK • Switch operating the light is broken. Call for service.OVEN TEMPERATURE • The oven thermostat needs adjustment. See the Adjust the OvenTOO HOT OR TOO COLD Thermostat—Do It Yourself section.OVEN DOOR • Press the CLEAR/OFF pad. Allow the oven to cool andACCIDENTALLY LOCKED then unlatch the door.WHILE BAKINGRAINBOW EFFECT IN • This is normal. It is caused by the heat treatment applied to the oven window.THE OVEN WINDOW(on some models)If you need more help…call, toll free:GE Answer Center®800.626.2000consumer information service