GE JGBP86 Owner's Manual & Installation Instructions

Also see for JGB908: Owner's manual Owner's Manual & Installation Instructions Dimension Guide Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions

GE JGBP86 Owner's Manual & Installation Instructions Manual pdf 50 page image

Installation InstructionsELECTRICAL CONNECTIONS (CONT.)3B. Usage Situations where Appliance Power Cord willbe Disconnected Frequently.Do not use an adapter plug in these situations becausedisconnecting of the power cord places undue strain onthe adapter and leads to eventual failure of the adapterground terminal. The customer should have the two-prong wall receptacle replaced with a three-prong(grounding) receptacle by a qualified electricianbefore using the appliance.The installation of appliances designed for mobilehome installation must conform with the ManufacturedHome Construction and Safety Standard, Title 24 CFR,Part 3280 (formerly the Federal Standard for MobileHome Construction and Safety, Title 24, HUD, Part280) or, when such standard is not applicable, theStandard for Manufactured Home Installations, latestedition (Manufactured Home Sites, Communities andSet-Ups), ANSI A225.1, latest edition, or with localcodes. In Canada, mobile home installation must bein accordance with the current CAN/CSA Z240/MHMobile Home Installation Code.Electric Disconnect Locate disconnect plug on the range back. Pinch sides of connector and pull out of range back.SEAL THE OPENINGS4Seal any openings in the wall behind the range and in thefloor under the range when hookups are completed.50ASSEMBLE SURFACE BURNERSAssemble the side burners as shown.Assemble the center burner. Make sure that thecenter griddle sits square and level between theside grates.CAUTION: Do not operate the burnerwithout all burner parts in place.Place the burner caps on the cooktop. Make surethat the caps are placed in the correct locations.There is one oval (center) head and cap assembly,one small cap, one medium cap, one large cap, andone extra large cap.BA5SideGrateBurner headand capassemblyCenterGriddleElectrodeMake sure the slot in the burner head ispositioned over the electrode.Medium burnerhead and capFront of rangeLarge burnerhead and capSmall burnerhead and capExtra large burnerhead and capOval head and capassemblyElectrodeSlotElectrodeBurner base(not removableon side burners)Burner cap