ge.comBurner cap properly seatedBurner cap not properly seatedBurner Head and Cap ReplacementReplace the burner head onto theburner base, making stlre that the head isproperly oriented over the burner baseand the electrode. Make sure to place thecoFi'ect btlFner head on the coFi'ectburner base and that the bm'ner head sitslevel on the bm'ner base. The bm'nerheads are not interchangeable.Replace the bm'ner cap onto the bm'nerhead, making sm'e to place the correctburner cap on the correct bm'ner head.The burner caps are not interchangeable._dso, make sm'e that the bm'ner caps areproperly seated on the btm_er heads.JGP940and JGP970(aft burners)JGP933and JGP963(right front burner only)BurnercapBurnerheadLocater _lectrodeindentations baseMake sure the pflTsf17the burner heads matchthe burner base flTdentafionsand that they areproperly seated in them by rotating the headsuntil they are levelJGP328,JGP330,JGP628,JGP630,JGP933,JGP945,JGP963,JGP975Stability Burnerhead Z I 1 Jcharnber__1_ ElectrodeBurner baseMake surethe slot in the burner headis positionedover the electrode. The burner cap has threeto four pflTs.When replacing the cap, make surenone of the pflTssits in the stability chambe_JGP945and JGP975(right front burner only)Burnercapassembly OrificeBurnerElectrode baseMake sure the hole f17the burner head assemblyis positioned over the electrode and that the burnerhead is fully inserted flTside the burner base. Asmall gap between the base and head is normalBurner Grates(Onsome models)"OUTSIDE.... INSIDE.... OUTSIDE"edge edges edge(Onsome models)"INSIDE""OUTSIDE"edge _ "OUTSIDE"edgeTabs34mr cooktop has professional sb'legrates. These grates are designed t0rspecific positions. These grates shouldonly be used in their proper positions;they should not be interchanged. Foryore" convenience, the tmdersides otthe left and fight grates are marked"OUTSIDE" and "INSIDE", Make sm'ethat the sides marked "OUTSIDE" arefi_dng the outer edge of the cooktop andthe sides marked "INSIDE" arefi_cing each othe_: _M1gratesshould touch once they areflflly assembled on thecooktop Stli'l'ilce,For cooktops with three grates,make sure that the tabs oneither side of the center gratefit into the slots located on the"INSIDE" edge ot the sidegrates.I,ifl the bm'ner grates out only whencool. Grates should be washed regularlyand, of cotlrse, after spillovers. Washthem in the dishwasher or in hot, soapywater and rinse with clean water: _,_l_enreplacing the grates, be sure they arepositioned securely over the burners._Mthough they are din'able, the grates willgradually lose their shine, regardless ofthe best care you can give them. This isdue to their continual exposure to hightemperatures. Ybu will notice this soonerwith lighter color grates.Do not operate a bm'ner for an extendedperiod of time without cookware on thegrate. The finish on the grate may chipwithout cookware to absorb the heat.NOTE:Donotcleanthegratesin aself-cleaningoven.11
