All GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range. RListed byUnderwritersLaboratoriesJGSP28SENGE® 30" Slide-In Gas Range with Self-Cleaning OvenDimensions and Installation Information (in inches)Specification Revised 7/09330232Rear filler strip or backguard are available forthese rangesNote: Door handle protrudes 3" from door face.Cabinets and drawers on adjacent 45° and 90°walls should be placed to avoid interference withthe handle.Note: Cabinets installed adjacent to slide-inranges must have an adhesion spec of at least194° temperature rating.Optional Kits for Slide-In Gas Ranges:(Available at additional cost)Lower Trim KitsJXS56BB - Lower Trim Kit (Black)Accessory BackguardsJXS32SS - Brushed-Chrome Accessory BackguardJXS37BB - Black Glass Accessory BackguardRear Filler StripWB07T10680 - Black Filler Strip AssemblyInstallation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000. Dimension and installation information are shown in inches.If you are NOT using theoptional Filler or Backguard:23-3/1630If you are using the optionalFiller or Backguard:2530Counter Cutout Dimensions (in inches)29-15/16” min.30-1/16” max.35-7/8”–38” fromfloor to countertopFor optimuminstallation thesesurfaces must beflat and levelFollow instructionspackaged withalternate appliance30” min. fromcooking surfaceto bottom ofoverheadcabinets 18” min. vertical distancefrom the bottom of theadjacent overhead cabinetsCountertop depth25” (typical)1-1/4” min. countertopto top of drawer6” min. from walls23-3/16”24” min.30” min.13” max.depth15”7”Max. depthof cord, plug,recept. box &gas hookup3.5” to preventinterferencewith drawerAcceptable Gas Line &Electrical Outlet Area3”12”29-15/16” min.30-1/16” max.35-7/8”–38” fromfloor to countertopFor optimuminstallation thesesurfaces must beflat and levelFollow instructionspackaged withalternate appliance30” min. fromcooking surfaceto bottom ofoverheadcabinets 18” min. vertical distancefrom the bottom of theadjacent overhead cabinetsCountertop depth25” (typical)1-1/4” min. countertopto top of drawer6” min. from walls23-3/16”24” min.30” min.13” max.depth15”7”Max. depthof cord, plug,recept. box &gas hookup3.5” to preventinterferencewith drawerAcceptable Gas Line &Electrical Outlet Area3”12”