GE JGSP28SENSS Owner's Manual

Also see for JGSP28: Owner's manual Installation instructions Owner's manual Owner's manual Owner's manual

10CONTROLPRESS + AND – AND HOLD FOR 3 SECONDSOven Control, Clock and Timer Features and SettingsBAKE/TEMP RECALL PadTouch this pad to select the bake function.BAKE LightFlashes while in edit mode—you can changethe oven temperature at this point. Glows whenthe oven is in bake mode.START/ON PadMust be touched to start any cooking orcleaning function.DisplayShows the time of day, oven temperature,whether the oven is in the bake, broil or self-cleaning mode and the times set for the timeror automatic oven operations. The display willshow “PrE” while preheating. When the ovenreaches the selected temperature, the ovencontrol will beep and the display will show theoven temperature.Function Error CodeIf “F– and a number or letter” flash in the display andthe oven control signals, this indicates a functionerror code.If the function error code appears during the self-cleaning cycle, check the oven door latch. The latchhandle may have been moved, even if only slightly,from the latched position. Make sure the latch ismoved to the right as far as it will go.Touch the CLEAR/OFF pad. Allow the oven to coolfor one hour. Put the oven back into operation. If thefunction error code repeats, disconnect the power tothe range and call for service.KITCHEN TIMER ON/OFF PadTouch this pad to select the timer feature.Then press + and – pads to adjust time.TIMER LightFlashes while in edit mode—you can changethe set time at this point. Glows when the timerhas been activated. Flashes again when thetime has run out until the control is reset.CLOCK PadTo set clock, touch this pad twice and thentouch the + and – pads. The time of day willflash in display when oven is first turned on.START TIME PadUse along with the COOKING TIME or SELFCLEAN pads to set the oven to start and stopautomatically at a time you set.START TIME Time LightFlashes while in edit mode—you can changethe start time set time at this point. Glows whenthe function has been activated.COOKING TIME PadTouch this pad and then touch the + or –pads to set the amount of time you want yourfood to cook. The oven will shut off when thecooking time has run out.COOKING TIME LightFlashes while in edit mode—you can change settime at this point. Glows when function hasbeen activated. Flashes again when the timehas run out until the control is reset.AUTOMATIC OVEN LightThis lights anytime the oven has beenprogrammed using the COOKING TIME orSTART TIME functions.Throughout this manual, features and appearance may vary from your model.Using the oven controls.