GE JKP16 Use And Care Manual

Also see for JKP18 Series: Technical service guide Owner's manual Owner's manual Owner's manual Installation instructions

GE JKP16 Use And Care Manual Manual pdf 16 page image

r CONVECTION ROASTING(continued)How to Set Your Oven for Convection Roasting When Using the Temperature Probe –NOTE: For best results when roasting largeturkeys and roasts, we recommend using the probeincluded in the convection oven. For correctplacement of the probe, see the description in theRegular Roasting section.The display will flash “PROBE” and the ovencontrol will signal if the probe is inserted intothe outlet, but the oven is not programmed forthe probe.into the meat.2. Plug the probeL@Ainto the outlet on the <oven wall. Make sure1. Place the offset shelfin the lowest position(A). Insert the probeit is pushed all theway in. Close theoven door.m ‘“pressPROBEthe PROBE pad.the INCREASE or DECREASEA pad until the desired internal probetemperature is displayed.~~v\ 1CONV.ROAST5. Press the CONV. ROAST pad.6. Press the INCREASE or DECREASEpad. The last oven set temperatureappears in the display. Continuepressing until the desired temperatureis displayed.The oven will start automatically.The words “CONV ON” and theroasting temperature you set willbe in the display.After a few seconds, the words “LO PROBE” willreplace the roasting temperature in the display.After the internal temperature of the meat reaches10O”F., the changing internal temperature will beshown in the display.3 7. When the internal temperature of theCLEAR meat reaches the number you haveOFF set, the probe and the oven turn offand the oven control signals. To stopthe signal, press the CLEAR/OFF pad.Use hot pads to remove the probefrom the food. Do not use tongs topull on it—they might damage it.CAUTION: To prevent possible burns, do not –unplug the probe from the oven outlet until the ovenhas cooled. Do not store the probe in the oven.NOTE:l If the probe is removed from the food before thefinal temperature is reached, a tone will sound andthe display will flash until the probe is removedfrom the oven.l You will hear a fan while cooking with this feature.The fan will stop when the door is opened but theheat will not turn off.l A second fan may automatically turn on and off tocool internal parts. This is normal and the fan maycontinue to run even after the oven is turned off.l You can use the timer even though you cannot usetimed oven operations.To change the oven temperature during theConvection Roast cycle, press the CONV. ROASTpad and then press the INCREASE or DECREASEpad to get the new desired temperature.16