GE JKP86 Installation Instructions Manual

Also see for JKP86: Technical service guide Owner's manual User guide Owner's manual Owner's manual

Contents

7Installation InstructionsElectrical Connections cont.B4 Three-Conductor BranchCircuit ConnectionWhen connecting to a three-conductor branchcircuit, if local codes permit:a. Connect the bare oven ground conductorwith the crimped neutral (white) lead tothe branch circuit neutral (white or grayin color), using a wire nut.b . Connect the oven red lead to the branchcircuit red lead in accordance with localcodes, using a wire nut.c. Connect the oven black lead to the branchcircuit black lead in accordance with localcodes, using a wire nut. If the residencered, black or white leads are aluminumconductors, see WARNING on page 6.d. Install Junction Box Cover.B3 New Construction andFour-Conductor BranchCircuit Connection• When installing in new construction, or• When installing in a mobile home, or• When installing in a recreational vehicle, or• When local codes do not permit groundingthrough neutral:a. Cut the neutral (white) lead from the crimp.Re-strip the neutral (white) lead to exposethe proper length of conductor.b. Attach the appliance grounding lead (greenor bare copper) in accordance with localcodes. If the residence grounding conductoris aluminum, see WARNING on page 6.c. Connect the oven neutral (white) lead tothe branch circuit neutral (white or gray)in accordance with local codes, using awire nut.d. Connect the oven red lead to the branchcircuit red lead and the oven black lead tothe branch circuit black lead in accordancewith local codes, using wire nuts. If theresidence red, black or white leads arealuminum conductors, see WARNING onpage 6.e. Install Junction Box Cover.BGroundWireJunction BoxCoverJunction BoxCoverGround andNeutral Wires