GE AppliancesJKS06BFBB – GE 27" Built-In Single OvenInstallation Information: Before installing, consult installationinstructions packed with product for current dimensional data.Dimensions (in inches)Specification Created 7/022" x 4"or equiv.runnersB MIN.C MIN.Conduit 49" long32-1/2D10A Allow 3/4"for overlapover all edgesof cutoutLocatejunction boxeither 5" MIN.below cutoutfloor or 34"MIN. abovecutout floorMinimumcutout locationfrom floor(Minimum 15-5/8"from floor wheninstalled below built-inmicrowave oven)EGF20Note: These ovens are notapproved for stackable orside-by-side installations.Note: These ovens can beinstalled side-by-side with noless than 30" distance betweencenter-to-center of each oven.Note: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating.Note: For 27" built-in single ovens, if marks,blemishes or the cutout opening is visibleabove the installed oven, it may be necessaryto add wood shims under the runners and fronttrim until the marks or openings are covered.Cabinet 27"A – Cabinet Width Required 27" min.B – Minimum Cabinet Depth 23-5/8"C – Opening Width 25" min. - 25-1/4 max.D – Opening Height 27-5/8" min. - 28-1/8 max.OvenF – Overall Depth 23-5/8"w/o trim 28-1/4"G – Overall Height with trim 29"H – Overall Width 26-5/8"CLSuitablebracingto supportrunners 18"Over centerlineof cabinet2" x 4" orequivalentrunners(Must support 275 lbs.)RListed byUnderwritersLaboratoriesFor answers to your Monogram,® GE Profile™ orGE appliance questions, visit our website atGEAppliances.com or callGE Answer Center® service, 800.626.2000.KW Rating240V 3.4208V 2.6Breaker Size240V 20 Amps208V 20 Amps