GE JNM7196SFSS Installation Instructions Manual

Also see for DVM7195: Use and care manual Installation instructions Owner's manual Owner's manual Owner's manual

GE JNM7196SFSS Installation Instructions Manual Manual pdf 10 page image

10ALIGNING THE WALL PLATEDraw a vertical line on the wall at the center of the 30swide space.Use the mounting plate as the template for the rear wall.Place the mounting plate on the wall, making sure thatthe tabs are WRXFKLQJWKHERWWRPRIWKHFDELQHWRUWKHOHYHOOLQHGUDZQLQ6WHS&IRUFDELQHWVZLWKIURQWRYHUKDQJ/LQHXSWKHQRWFKDQGFHQWHUOLQHRQWKHPRXQWLQJSODWHWRWKHFHQWHUOLQHRQWKHZDOOWhile holding the mounting plate with one hand, drawcircles on the wall at holes A, B, C and D (see illustrationabove/actual plate marked with arrows). Four holesPXVWEHXVHGIRUPRXQWLQJNOTE: Holes C and D are inside area E. If neither C nor Dis in a stud, find a stud somewhere in area E and draw afifth circle to line up with the stud. It is important to useat least one wood screw mounted firmly in a studto support the weight of the oven.6HWWKHPRXQWLQJSODWHDVLGHWARNING:5LVNRIHOHFWULFVKRFN&DQFDXVHLQMXU\RUGHDWK7DNHFDUHWRQRWGULOOLQWRHOHFWULFDOZLULQJLQVLGHZDOOVRUFDELQHWVDrill holes on the circles. If there is a stud, drill a 3ø16s holefor wood screws. For holes that don’t line up with a stud,drill a 5ø8s hole for toggle bolts.NOTE:'2127028177+(3/$7($77+,67,0(234Draw aVertical Lineon Wall fromCenter of TopCabinetArea EHole AHole BHole DHole CDInstallation InstructionsCAUTION::HDUJORYHVWRDYRLGFXWWLQJILQJHUVRQVKDUSHGJHV1