GE JP350 Owner's Manual

Also see for JP350: Installation instructions Installation instructions Owner's manual Owner's manual Technical service guide

Contents

GE JP350 Owner's Manual Manual pdf 6 page image

6Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer SupportUsing the surface units.Throughout this manual, features and appearance may vary from your model.How to SetPush the knob in and turn in eitherdirection to the setting you want.At both OFF and HI the control clicksinto position. You may hear slightclicking sounds during cooking,indicating the control is keeping thepower level you set.The controls for the radiant surface unitscan be set anywhere between LO and HIfor an unlimited number of heat settings.With the infinite switch the unit cycleson and off to maintain your selectedcontrol setting.The control must be pushed in to setonly from the OFF position. When thecontrol is in any position other than OFF,it may be rotated without pushing it in.The UNIT ON indicator light will glowwhen any surface unit is on.A HOT SURFACE indicator light will glowwhen any radiant element is turned onand will remain on until the surface iscooled to approximately 150°F.NOTE: It comes on when the unit is hot to the touch. It stays on even after the unit is turned off. It glows brightly until the unit is cooled toapproximately 150°F.Never cook directly on the glass.Always use cookware.About the radiant surface units…The radiant cooktop features heatingunits beneath a smooth glass surface.NOTE: A slight odor is normal when a newcooktop is used for the first time. It is caused bythe heating of new parts and insulating materialsand will disappear in a short time.NOTE: On models with light-colored glasscooktops, it is normal for the cooking zones tochange color when hot or cooling down. This istemporary and will disappear as glass cools toroom temperature.The surface unit will cycle on and off tomaintain your selected control setting.It is safe to place hot cookware from theoven or surface on the glass cooktopwhen the surface is cool.Even after the surface units are turnedoff, the glass cooktop retains enoughheat to continue cooking. To avoidovercooking, remove pans from thesurface units when the food is cooked.Avoid placing anything on the surfaceunit until it has cooled completely. Water stains (mineral deposits) are removableusing the cleaning cream or full strength whitevinegar. Use of window cleaner may leave aniridescent film on the cooktop. The cleaningcream will remove this discoloration. Don’t store heavy items above the cooktop.If they drop onto the cooktop, they can causedamage. Do not use the surface as a cutting board.Do not slidecookware acrossthe cooktopbecause it canscratch the glass.The glass isscratch-resistant,not scratchproof.DRAGGING SURFACECOOKINGOFF CENTERAlways place the pan in the center ofthe surface unit you are cooking on.Be sure you turn the control knob toOFF when you finish cooking.Dual Surface Unit (on some models)The right front surface unit has 2 cooking sizes toselect from so you can match the size of the unitto the size of the cookware you are using.To use the large (9-inch) surface unit,turn the SELECTOR knob clockwise to .Push in and turn the control knob to thedesired setting. The unit will heat theentire area contained by the larger circle.To use the small (6-inch) surfaceunit, turn the SELECTOR knobcounterclockwise to . Push in andturn the control knob to the desiredsetting. The unit will only heat the areainside the smaller circle.Small 6″surface unitsettingLarge 9″surface unitsetting