GE JP989SKSS Owner's Manual & Installation Instructions

Also see for JP989 Series: Owner's Manual & Installation Instructions Owner's Manual & Installation Instructions Technical service guide Owner's Manual & Installation Instructions

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support11Burned-On ResidueWARNING: DAMAGE to your glass surfacemay occur if you use scrub pads other thanthe pad included with your cooktop.Allow the cooktop to cool.Spread a few drops of CERAMABRYTE® Ceramic Cooktop Cleanerto the entire burned residue area.Using the included CERAMABRYTE® Cleaning Pad for CeramicCooktops, rub the residue area,applying pressure as needed.If any residue remains, repeat thesteps listed above as needed.For additional protection, after allresidue has been removed, polishthe entire surface with CERAMABRYTE® Ceramic Cooktop Cleanerand a paper towel.The CERAMA BRYTE ® CeramicCooktop Scraper and allrecommended supplies areavailable through our Parts Center.See instructions under “To OrderParts” section on next page.NOTE: Do not use a dull ornicked blade.Heavy, Burned-On ResidueAllow the cooktop to cool.Use a single-edge razor bladescraper at approximately a 45°angle against the glass surface andscrape the soil. It will be necessaryto apply pressure to the razorscraper in order to remove theresidue.After scraping with the razorscraper, spread a few drops ofCERAMA BRYTE® CeramicCooktop Cleaner to the entireburned residue area. Use theCERAMA BRYTE® Cleaning Padto remove any remaining residue.For additional protection, after allresidue has been removed, polishthe entire surface with CERAMABRYTE® Ceramic Cooktop Cleanerand a paper towel.Use a CERAMA BRYTE ® CleaningPad for Ceramic Cooktops or aScotch-Brite® Multi-Purpose NoScratch blue scrub pad.Normal Daily Use CleaningONLY use CERAMA BRYTE® CeramicCooktop Cleaner on the glass cooktop.Other creams may not be as effective.To maintain and protect the surface ofyour glass cooktop, follow these steps:Before using the cooktop for thefirst time, clean it with CERAMABRYTE® Ceramic Cooktop Cleaner.This helps protect the top andmakes clean-up easier.Daily use of CERAMA BRYTE®Ceramic Cooktop Cleaner will helpkeep the cooktop looking new.Shake the cleaning cream well.Apply a few drops of CERAMABRYTE® Ceramic Cooktop Cleanerdirectly to the cooktop.Use a paper towel or CERAMABRYTE® Cleaning Pad for CeramicCooktops to clean the entirecooktop surface.Use a dry cloth or paper towelto remove all cleaning residue.No need to rinse.NOTE: It is very important that you DO NOTheat the cooktop until it has been cleanedthoroughly.Clean your cooktop aftereach spill. Use CERAMABRYTE® Ceramic CooktopCleaner.Cleaning the glass cooktop. ge.com