GE JSP26 Use And Care Manual

Also see for JSP26: Owner's manual Installation instructions Owner's manual Use & care guide Use and care guide

Contents

.,You may feel that your new oven cooks differentlythan the one it replaced. We recommend that youuse your new oven for a few weeks to become morefamiliar with it, following the times given in yourrecipes as a guide.If you think your new oven is too hot or too cold,you can adjust the thermostat yourself. If you thinkit is too hot, adjust the thermostat to make it cooler. Ifyou think it is too cool, adjust the thermostat to makeit hotter.We do not recommend the use of inexpensivethermometers, such as those found in grocery stores,to check the temperature setting of your new oven.These thermometers may vary 20-40 degrees.To Adjust the Thermostat:n1. Press the BAKE pad.BAKE2. Select an oven temperature between 500”F.and 550”F.3. Immediately, before the BAKE indicator stopsflashing, press and hold the BAKE pad for about4 seconds. The display will change to the ovenadjustment display.4. The oven temperature can be adjusted up to(+) 35”F. hotter or (-) 35°F. cooler. Use theINCREASE or DECREASE pads to select thedesired change in the display.c15. After you have made the adjustment,CM press the CLEAWOFF pad to go backOFF to the time of day display. Use your ovenas you would normally.NOTE: This adjustment will not affect the broilingor self-cleaning temperatures. It will be retained inmemory after a power failure.19