GE JSP42SKSS Dimensions And Installation Information

GE JSP42SKSS Dimensions And Installation Information Manual pdf 1 page image

Dimension and installation information are shown in inches.JSP42SKGE® 30" Slide-In Electric RangeDimensions and Installation InformationSpecification Revised 1/08320642For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center ® service,800.626.2000.All GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.Models are shipped with color-matched Rear Filler Strip Kit.Optional Kits For Slide-InElectric Ranges(Available at additional cost)Lower/Side Trim Kits Accessory BackguardsJXS56 - Lower Trim Kit JXS37 - BackguardJXS86 - Vertical Side Trim Kit JXS77 - Body SidesNote: To reduce possiblity of scorching of the side walladjacent to the heating elements, it is recommendeda minimum of 6” spacing from adjacent side wallsbe allowed for possible extended, high-heat, no-loadoperation of heating elements.Receptacle Location: For all 30” Slide-In Ranges locallyapproved flexible service cord or conduit must beused because terminals are not accessible after rangeinstallation. See shaded area in drawing for location ofelectrical outlet box. Recommended outlet locationsallow range to be installed directly against rear wall.Note: Cabinets installed adjacent to slide-in rangesmust have an adhesion spec of at least 194°.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.KW Rating240V 11.6208V 8.7If you are NOT using theoptional Filler or Backguard:23-3/1630If you are using the optionalFiller or Backguard:2530Listed byUnderwritersLaboratoriesAcceptableElectricalOutlet Area30" Min.30" Min.Shave Raised Edge To Clear31-1/8" Wide Control PanelExcluding Models JSS28 and JSP392-7/8"To FrontSurface OfCountertop20-5/8" DoorClearanceFrom FrontSurface ofCountertop31-1/43025-3/4**Recommended6" Min.From Walls23-3/1615" Min.A/B*13" Max.2-1/230259/167-1/22-1/2AccessoryBackguard2436-1/4*JXS37 is 5-1/4" and JXS32 is 4"(excluding handle) **Total depth from wall tofront of closed oven doorincluding handle is 27-13/16.35-7/8"–38"from floor tocountertopAcceptableElectricalOutlet Area30" Min.30" Min.Shave Raised Edge To Clear31-1/8" Wide Control PanelExcluding Models JSS28 and JSP392-7/8"To FrontSurface OfCountertop20-5/8" DoorClearanceFrom FrontSurface ofCountertop31-1/43025-3/4**Recommended6" Min.From Walls23-3/1615" Min.A/B*13" Max.2-1/230259/167-1/22-1/2AccessoryBackguard2436-1/4*JXS37 is 5-1/4" and J(excluding handle) **Total depth from wallfront of closed oven dincluding handle is 2735-7/8"–38"from floor tocountertop

/ 2

Related manuals for GE JSP42SK