GE JSP47 Installation Instructions Manual

Also see for JSP47: Owner's manual Owner's manual Owner's manual Owner's manual Installation instructions

Contents

GE JSP47 Installation Instructions Manual Manual pdf 1 page image

1If you have questions, call 1.800.GE.CARES or visit our website at:www.GEAppliances.comSelf-Cleaning RadiantElectric Slide-In RangeInstallationInstructions JSP47, JSP57, JS968229C4053P509-131-10534-1 (11-02 JR)Before You BeginRead these instructions carefully and completely.• IMPORTANT —Save theseinstructions for local inspector’s use.• IMPORTANT —Observe allgoverning codes and ordinances.• Note to Installer—Be sure to leave theseinstructions with the consumer.• Note to Consumer—Keep theseinstructions for future reference.• Proper installation is the responsibilityof the installer and product failure dueto improper installation is NOT coveredunder warranty.• NOTE—This appliance must be properlygrounded.Parts IncludedAnti-Tip BracketScrewsRear Filler2 ScrewsMaterials Needed3-Wire Cord4’ long(UL Approved 40 or 50 AMP)Lag Bolts Anchor Sleeves(For Concrete Floors Only)4-Wire Cord4’ longORTools You Will Need1/8” Drill Bit andElectric or Hand Drill1/4” Nut DriverLevelTape MeasureStraight Edgeor SquareHand or Sabre SawPencilSafety GlassesWrench or Pliers(for 1-7/16” Nut)Pliers