GE JDP47 Installation Instructions Manual

Also see for JD900: Owner's manual Installation instructions Installation instructions Owner's manual Owner's manual

GE JDP47 Installation Instructions Manual Manual pdf 1 page image

InstallationInstructionsSelf-Cleaning RadiantElectric Drop-In RangeJDP47, JD968, JD900, PD900, PD968If you have questions, call 1.800.GE.CARESor visit our website at:GEAppliances.comBefore You BeginRead these instructions carefully and completely.• IMPORTANT-save theseinstructions for local inspector's use.• IMPORTANT-observe allgoverning codes and ordinances.• Note to Installer--Be sure to leave theseinstructions with the consumer.• Note to Consumer--Keep theseinstructions for future reference.• Proper installation is the responsibilityof the installer and product failure dueto improper installation is NOT covered underthe warranty.• NOTE--This appliance must be properlygrounded.• ATTENTION INSTALLERAll electric drop-in ranges must be hard wired(direct wired)into an approved junction box. Aplug and receptacle is NOT permitted on theseproducts.Parts Included2 Shoulder Screws (forstop device) Lower Trim4 ScrewsMaterials Needed@Junction Box Strain Relief Clamp for1/2" conduitWire NutsTools You Will Need1/8" Drill Bit and Electricor Hand DrillLevelTape MeasureStraight Edgeor SquareHand or Sabre SawPhillips ScrewdriverStandard ScrewdriverNut DriverHammerPencilSafety Glasses31-i0622-3 o2-1o 1