GE JT3500SFSS Dimensions And Installation Information

GE JT3500SFSS Dimensions And Installation Information Manual pdf 1 page image

Dimensions and Installation Information (in inches)Listed byUnderwritersLaboratoriesFor answers to your Monogram ® or GE appliancequestions, visit our website at geappliances.comor call GE Answer Center ® service, 800.626.2000.Specification Created 2/13 320152JT3500SFGE® 30" Built-In Double Wall OvenNote: Cabinets installed adjacent to wall ovensmust have an adhesion spec of at least a 194°Ftemperature rating.Door handle protrudes 3" from door face.Cabinets and drawers on adjacent 45° and 90°walls should be placed to avoid interference withthe handle.Electric wall ovens are not approved forinstallation with a plug and receptacle.They must be hard wired in accordance withinstallation instructions.Installation Information: Before installing,consult installation instructions packed withproduct for current dimensional data.KW Rating240V 8.8208V 6.6Breaker Size240V 40 Amps208V 30 AmpsCutout depth23-1/2" MIN47" tobottom ofjunction box22"DFEConduit40"Junction boxlocation2 x 4 orequivalent runnerslevel with bottom of cutoutand flush with sides of cutoutor solid bottom floor.rt 375 lbs.)Cabinet 30"A – Overlap of oven at top of cutout 1"B – Overlap of oven over side of edges of cutout 3/4"C – Overlap of oven at bottom of cutout 1-1/4"OvenD – Overall depth with handle 27-3/16"E – Overall height with trim 52-5/8"F – Overall width 29-3/4"9-1/2" MAX.PT7550JT5500JT3500B30''ACCutout width28-1/2" MIN.28-5/8" MAX.Recommendedminimumcutout locationfrom the floor12"Cutout height50-1/4" MIN.without pedestal51-13/16" MIN.51-15/16" MAX.with pedestalCutout depth23-1/2" MIN47" tobottom ofjunction boxJunction boxlocationCabinet 30"A – Overlap of oven at top of cutout 1"B – Overlap of oven over side of edges of cutout 3/4"C – Overlap of oven at bottom of cutout 1-1/4"OvenD – Overall depth with handle 27-3/16"E – Overall height with trim 52-5/8"F – Overall width 29-3/4"9-1/2" MAX.PT7550JT5500JT3500B30''ACCutout width28-1/2" MIN.28-5/8" MAX.Recommendedminimumcutout locationfrom the floor12"Cutout height50-1/4" MIN.without pedestal51-13/16" MIN.51-15/16" MAX.with pedestal23" minimumdoor openingallowanceCutout depth23-1/2" MIN47" tobottom ofjunction box22"DFEConduit40"Junction boxlocationCL 2 x 4 orequivalent runnerslevel with bottom of cutoutand flush with sides of cutoutor solid bottom floor.Suitablebracingto supportrunners(must support 375 lbs.)CabA –B –C –OvenD –E –F –9-1/2" MAX.B23" minimumdoor openingallowance22"DFEConduit40"CL 2 x 4 orequivalent runnerslevel with bottom of cutoutand flush with sides of cutoutor solid bottom floor.Suitablebracingto supportrunners(must support 375 lbs.)9JT3550

/ 2

Related manuals for GE JT3500SF