JT5500SFGE Appliances 30" Built-In Double Wall Oven with ConvectionFor answers to your Monogram, GE Café™ Series, GE Profile™ Series orGE Appliances product questions, visit our website at geappliances.comor call GE Answer Center® Service, 800.626.2000. Specification Revised 4/16DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)Listed byUnderwritersLaboratoriesNOTE: Cabinets installed adjacent to wallovens must have an adhesion spec of at least a194°F temperature rating.Door handle protrudes 3" from door face.Cabinets and drawers on adjacent 45° and 90°walls should be placed to avoid interferencewith the handle.Electric wall ovens are not approved forinstallation with a plug and receptacle.They must be hard wired in accordance withinstallation instructions.INSTALLATION INFORMATION: Beforeinstalling, consult installation instructionspacked with product for current dimensionaldata.Cabinet 30"A – Overlap of oven at top of cutout 1"B – Overlap of oven over side of edges of cutout 3/4"C – Overlap of oven at bottom of cutout 1-1/4"OvenD – Install depth 23-1/2"E – Overall height with trim 53"F – Overall width 29-3/4"PT7550JT5500JT3500Cutout depth23-1/2" MIN47" tobottom ofjunction boxDFEConduit40"Junction boxlocation2 x 4 orequivalent runnerslevel with bottom of cutoutand flush with sides of cutoutor solid bottom floor.rt 375 lbs.)9-1/2" MAX.B30''ACCutout width28-1/2" MIN.28-5/8" MAX.Recommendedminimumcutout locationfrom the floor12"Cutout height50-1/4" MIN.without pedestal51-13/16" MIN.51-15/16" MAX.with pedestal22"Cabinet 30"A – Overlap of oven at top of cutout 1"B – Overlap of oven over side of edges of cutout 3/4"C – Overlap of oven at bottom of cutout 1-1/4"OvenD – Install depth 23-1/2"E – Overall height with trim 53"F – Overall width 29-3/4"PT7550JT5500JT3500Cutout depth23-1/2" MIN47" tobottom ofjunction boxJunction boxlocation9-1/2" MAX.B30''ACCutout width28-1/2" MIN.28-5/8" MAX.Recommendedminimumcutout locationfrom the floor12"Cutout height50-1/4" MIN.without pedestal51-13/16" MIN.51-15/16" MAX.with pedestalCabA –B –C –OveD –E –F –23" minimumdoor openingallowanceCutout depth23-1/2" MIN47" tobottom ofjunction boxDFEConduit40"Junction boxlocationCL 2 x 4 orequivalent runnerslevel with bottom of cutoutand flush with sides of cutoutor solid bottom floor.Suitablebracingto supportrunners(must support 375 lbs.)9-1/2" MAX.B22"23" minimumdoor openingallowanceDFEConduit40"CL 2 x 4 orequivalent runnerslevel with bottom of cutoutand flush with sides of cutoutor solid bottom floor.Suitablebracingto supportrunners(must support 375 lbs.)922"JT5550KW RATING240V 8.4208V 6.3BREAKER SIZE240V 40 Amps208V 40 AmpsDimension andinstallation informationare shown in inches.