GE JTP30SM Dimensions And Installation Information

Also see for JTP30SM: Brochure

Contents

undercounter installation

GE JTP30SM Dimensions And Installation Information Manual pdf 2 page image

Dimensions and Installation Information (in inches)For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.320222Specification Revised 10/07JTP30SMGE® 30" Built-In Single Wall OvenListed byUnderwritersLaboratoriesOptional Undercounter Installation with 36"Gas CooktopOptional Undercounter Installation With 30" CleanDesignor Sealed Burner Gas CooktopPower cordfor cooktopJunction boxfor ovenJunction box inadjacent cabinetfor cooktophook-up2 (two) 90°elbows &sufficient pipe toconnect in adjacentcabinetRight cabinet side3/4" SupportShut-offvalvePressureregulator1/2" Blackiron pipeUnionConduit(72" long)30" built-inoven3-1/2" MIN.Free space4" To 4-1/2"3-1/422Side View5-9/16"Reference dim. forMAX. support heightwith typical 36" countertopheight36" TypicalCountertop heightPower cordReference5-9/1630-7/16Free space1-1/2" MIN.1-1/2" Typical countertopSide View2227-5/16" MAX.Cutout height27-1/4" MIN.Junction box(s) foroven & radiantcooktop 22" from floorAdd suitable fillerto match adjacentcabinets when neededto maintain toe kickalignment30" Oven W/ Rad. Cktp.Undercounter Installation52425Gas or electric cooktops may be installed overthis oven. See cooktop installation instructionsfor cutout size. See label on top of oven forapproved cooktop models. Gas (including the pressure regulator) andelectrical connections for gas cooktop mustbe located in an adjacent accessible location.For a 30" gas cooktop, the connections aremore conveniently made to the right.120 VoltOutletGasconnectionJunction boxlocation240/208V36'' MIN.4'' To 4-1/2 '' Toe kick allowableMatch toe kick heightfront and two sides22'' MIN. abovesupport platformTop and/or sidefillers may benecessary if unitis positionedbetweenexisting cabinets28-1/2'' MIN.28-5/8'' MAX.27-1/4'' MIN.27-5/16'' MAX.Cutout height3/4'' Supportplatform required23-1/2" MIN.Cutout depthAllow 11/16''overlap over sideedges of cutout1-1/2"CountertopThis installation is to achieve minimum gap between bottom of countertop and control panel.Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick.Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°Ftemperature rating.Note: 36" ribbon cooktops are approved for use over GE 30" single wall ovens only. 30" ribboncooktops are approved for use over GE 30" and GE 27" single wall ovens. Refer to cooktop andwall oven installation information packed with products for current dimensional data.Installation Information: Before installing, consult installation instructions packed with productfor current dimensional data.

/ 3

Related manuals for GE JTP30SM