GE JVM2052 Installation Instructions Manual

Also see for JVM2052: Installation instructions Owner's manual Owner's manual Owner's manual Installation instructions

Contents

Installation InstructionsDAMAGE- SHIPMENT/INSTALLATION• If the unit is damaged in shipment, return the unitto the store in which it was bought for repair orreplacement.• If the unit is damaged by the customer, repair orreplacement is the responsibility of the customer.• If the unit is damaged by the installer (if other thanthe customer), repair or replacement must be madeby arrangement between customer and installer.PARTS INCLUDEDHARDWARE PACKETPART QUANTITYLagScrews(1A"x 2"} 4(for wall stud holes)i _b_,_,_,,_ ToggleBolts(1/4"x 3") 4(for drywall holes)SpringToggleHeads 4(for toggle bolts)Bolts 2(for securingtothe uppercabinet)TappingScrews(1A"x1A") 1 black(for attachingthe 2 bronzedamperduct connector)PowerCordClampand 1Dark-ColoredMountingScrew (to holdthe powercord)You will find the installation hardware containedin a pocket with the unit. Check to make sure youhove all these ports.NOTE:Some extra ports ore included.NOTE:You need to install at least two log screwsinto a 2" x 4" stud and four anchor bolts into the wall.Also, the mounting area must meet the 150 Ibs.weightrequirement.PARTS INCLUDEDADDITIONAL PARTSPART QUANTITYL •i pperCabinet÷ TemplateRearWall..,0i Templatei (3 piecesmountingplateonly)installationinstructionsExhaustAdapterDamper 1PowerCord 1____'_' ClampBushing(forthe cordholein a metaluppercabinet)6