GE JVM2052 Installation Instructions Manual

Also see for JVM2052: Installation instructions Owner's manual Owner's manual Owner's manual Installation instructions

Contents

Installation InstructionsF_ PREPARE THE VENTING {cont.}F_ INSTALLATION TYPES {cont.)Wall-Vented Installation (cont.):[_ Reassemble the blower wire.% Rotate the unit so that the exhaust ports facethe rear of the cabinet. When gou insert the blowerunit, the blower wire must be as shown.unit%[]ExhaustportsPlace the blower unit back into the cabinet.Check that the exhaust ports face towardthe rear of the cabinet.Reattach the blower plate to the cabinet so theexhaust ports and blower plate opening are aligned.Attach with one blower unit mounting screw andthen one blower plate mounting screw.Blower unitBlowerplatemounting screwI__ (option)........ ............. wer plate"E:!° i-__'Blowe[ unit_'_ _"_ - mounting screwBlowerunitexhaustports (option)11Roof-Vented Installation:[] Remove one blower unit mounting screw and oneor two blower plate screw(s). Remove the blowerplate from the cabinet. Blowerplatemountingscrew(option)Blowerunit --,_r i_ctllplatei..........i'i.............i!__)"_ _'IBIowerunit__--------_ r-T_ountingscrewParts"B" (option)% Use side cutter or tin snips to cut and removeknockouts "A" from the blower plate. Discardknockouts. Be careful not to distort the plate.",_ Knockouts"A"glower_%%%%Carefully lift the blower unit out of the microwaveoven.Rotate the blower unit 90° so the exhaust portsface the top of the cabinet.__ BlowerunitReassemble the blower wire.Place the blower unit back into the microwave oven.Reattach the blower plate to the microwave oven.Attach with the one blower unit mounting screw andthen the one or two blower plate mounting screw(s).BlowerunitBl_owerplatemountingscrew(option)BlowerunitBlower --. _e1_ mountingscrew(option)[_ Attach the exhaust adapter to the blower plateby sliding it into the Guide..__ Exhaustadapter_q:---- Backof oven