6 49-80760Lo Med Hi LightHold 2 Secfor Auto OffHold 2 Secto BoostFan Settings1. Rangehood Control Panel: The control panelis located on the front of the canopy. The positionand function of each control button are noted below.2. Light Button: On/Night/Off switch for the halogenlights. Press the LIGHT button to turn the lights on,again to set the lights to night setting, and again toturn off.3. Fan Off Button: Off switch for the fan. The fancan be operated by pressing any of the fan settingbuttons.Hold for 2 seconds to activate auto off after15 minutes.4. Fan Settings Buttons: Speed control forfan. Press the switch Lo for LOW speed, Med forMEDIUM speed and Hi for HIGH speed. Hold downthe Hi button for 2 seconds to activate the BOOSTSPEED that will run for 10 minutes.41USING THE HOOD: Controls Controls23