GE Lumination LUR Series Installation Manual

1LUR SeriesLuminationTMLED LuminaireInstallation GuideBEFORE YOU BEGINRead these instructions completely and carefully.WARNING/AVERTISSEMENTRISK OF FIRE OR ELECTRIC SHOCK• Turn power off before inspection, installation or removal.• Properly ground electrical enclosure.• Follow all NEC and local codes.• Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation. Do not leave anyother open holes in an enclosure of wiring or electrical components.• LUR LED retrofit kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact aqualified electrician.• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.• Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings and wherethe input rating of the retrofit kit does not exceed the input rating of the luminaire.• Use only UL approved wire for input/output connections. Minimum size 18 AWG or 14 AWG for continuous runs.• When using multi-branch wire circuits with a shared neutral, do not operate any circuit with the neutral open. Also ensure all neutralconnections are secure before energizing the circuit. An open neutral can cause an overvoltage condition at the luminaire power supply.To learn more about our products,go to www.led.comThis device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.CAN ICES-005 (A) / NMB-005 (A).NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference to radio communications.Operation of this equipment in a residential area is likely to cause harmful interference in which casethe user will be required to correct the interference at his own expense.