© 2015 General Electric Company. All rights reserved .2 | =GE Oil & GasAbout this GuideThe information in this manual is subject to change without prior notice.The information contained in this manual, in whole or part, shall not be transcribed orcopied without GE Oil & Gas’ written permission.In no case does this manual guarantee the merchantability of the positioner or thesoftware or its adaptability to a specific client needs.Please report any errors or questions about the information in this manual to yourlocal supplier or visit www.geoilandgas.com/valves.DisclaimerTHESE INSTRUCTIONS PROVIDE THE CUSTOMER/OPERATOR WITH IMPORTANTPROJECT-SPECIFIC REFERENCE INFORMATION IN ADDITION TO THE CUSTOMER/OPERATOR'S NORMAL OPERATION AND MAINTENANCE PROCEDURES. SINCEOPERATION AND MAINTENANCE PHILOSOPHIES VARY, GE (GENERAL ELECTRICCOMPANY AND ITS SUBSIDIARIES AND AFFILIATES) DOES NOT ATTEMPT TO DICTATESPECIFIC PROCEDURES, BUT TO PROVIDE BASIC LIMITATIONS AND REQUIREMENTSCREATED BY THE TYPE OF EQUIPMENT PROVIDED.THESE INSTRUCTIONS ASSUME THAT OPERATORS ALREADY HAVE A GENERALUNDERSTANDING OF THE REQUIREMENTS FOR SAFE OPERATION OF MECHANICALAND ELECTRICAL EQUIPMENT IN POTENTIALLY HAZARDOUS ENVIRONMENTS.THEREFORE, THESE INSTRUCTIONS SHOULD BE INTERPRETED AND APPLIED INCONJUNCTION WITH THE SAFETY RULES AND REGULATIONS APPLICABLE AT THESITE AND THE PARTICULAR REQUIREMENTS FOR OPERATION OF OTHER EQUIPMENTAT THE SITE.THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS INEQUIPMENT NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET INCONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULDFURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISEWHICH ARE NOT COVERED SUFFICIENTLY FOR THE CUSTOMER/OPERATOR'SPURPOSES THE MATTER SHOULD BE REFERRED TO GE.THE RIGHTS, OBLIGATIONS AND LIABILITIES OF GE AND THE CUSTOMER/OPERATORARE STRICTLY LIMITED TO THOSE EXPRESSLY PROVIDED IN THE CONTRACTRELATING TO THE SUPPLY OF THE EQUIPMENT. NO ADDITIONAL REPRESENTATIONSOR WARRANTIES BY GE REGARDING THE EQUIPMENT OR ITS USE ARE GIVEN ORIMPLIED BY THE ISSUE OF THESE INSTRUCTIONS.THESE INSTRUCTIONS ARE FURNISHED TO THE CUSTOMER/OPERATOR SOLELY TOASSIST IN THE INSTALLATION, TESTING, OPERATION, AND/OR MAINTENANCE OFTHE EQUIPMENT DESCRIBED. THIS DOCUMENT SHALL NOT BE REPRODUCED INWHOLE OR IN PART WITHOUT THE WRITTEN APPROVAL OF GE.