GE Merlin Installation And Maintenance Manual

Also see for Merlin: Installation and maintenance manual Installation and maintenance manual Application guide

Contents

troubleshooting

16 THE BASIC REVERSE OSMOSIS SYSTEMRev JWhen all of the connections have been made, use the locking bar to hold thefittings in position. Match the symbols on the locking bar to the correspondingsymbols on the manifold.Figure 7 Locking BarConnector Symbol Connection Tubing ColorO Flushing (optional) BlueC Feed-Inlet NaturalU Concentrate BlackProduct BlueWARNING: Be sure to lubricate the O-rings on the fitting elbows withsilicone lubricant, prior to inserting into manifold.WARNING: Do not turn the incoming water valve on until the lockingbar is in place.NOTE: If the installation is not using the optional flush tank, the topconnection will not have tubing. Instead a plug will be inserted into thefitting. Do not remove plug unless you are attaching the tubing and theflush tank.Symbols