34Using the Self-Cleaning OvenWall OvenHow to delaythe start ofcleaning1 Press the SELF CLEAN pad.2 Using the number pads, enter the desiredclean time.3 Press the DELAY START pad.4 Using the number pads, enter the time of dayyou want the clean cycle to start.5 Press the START pad.The door locks automatically. The display willshow the start time. It will not be possible toopen the oven door until the temperature dropsbelow the lock temperature and the LOCKEDlight goes off.When the LOCKED light is off, open the door.NOTE: On double oven models, you can set a delayclean in both ovens at the same time. The second ovenset will automatically delay the start of cleaning untilthe end of the first oven’s clean cycle.To recall the start time of the second oven set,press the DELAY START pad on the controls forthe second oven.After aclean cycleYou may notice some white ash in the oven.Wipe it up with a damp cloth after the ovencools.If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with avinegar and water mixture.These deposits are usually a salt residue thatcannot be removed by the clean cycle.If the oven is not clean after one clean cycle,repeat the cycle.• You cannot set the oven for cooking until theoven is cool enough for the door to unlock.• While the oven is self-cleaning, you can pressthe CLOCK pad to display the time of day.To return to the clean countdown, press theCOOKING TIME pad.• If the shelves become hard to slide, wipe theshelf supports with cooking oil.