GE Consumer & Industrial AppliancesAssembly InstructionsAdvantium® Built-In Accessory Storage DrawerJX2200, JX2201, ZX2201MFL06213304 49-40594 12-08 JRSPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICEBEFORE YOU BEGINRead these instructions completely and carefully. Readthe Installation Instructions for the Advantium 120V or240V oven completely and carefully for cutout dimen-sions and step-by-step instructions.IMPORTANT — Save these instructions forlocal inspector’s use.IMPORTANT — Observe all governing codesand ordinances.• NOTE TO INSTALLER: Be sure to leave theseinstructions with the Consumer.• NOTE TO CONSUMER: Keep these instructions withyour Advantium 120V or 240V Oven Owner’s Manualfor future reference.• SKILL LEVEL: Installation of this appliance requiresbasic mechanical skills.• COMPLETION TIME: One hour with the installationof an Advantium 120V or 240V oven.• Proper installation is the responsibility of the installer.• Product failure due to improper installation is notcovered under the Warranty. See the Advantium120V or 240V Oven Owner’s Manual for warrantyinformation.TOOLS REQUIRED• #2 Phillips screwdriverPARTS SUPPLIED• Side supports (2)• Brass screws (8)• Color-matched screws (5)MODELS AVAILABLEProfile Models:JX2200BB–BlackJX2201SS–Stainless SteelMonogram Models:ZX2201SS–Stainless Steel (for installation above 36″ only)NOTE: Advantium 240V model ZSC2202SS andAdvantium 120V model ZSC1202 CANNOT beinstalled with an accessory storage drawer. SeeInstallation Preparation Without an Accessory StorageDrawer in the Installation Instructions for these models.PRODUCT DIMENSIONS AND CLEARANCESAllow 15” ClearanceWhen Fully Open5”REMOVE PACKAGING AND PARTS• Remove the drawer from the carton.• Remove all packing material and tape.• Open the drawer and remove any parts inside.• Locate parts.1Assembly InstructionsSide Supports (2)Under-the-Counter (UTC)Mounting BracketColor-MatchedScrews(4 required,1 extra)Screws(6 required,2 extra)NOTE: Appearance will vary by model.• Under-the-CounterMounting Bracket (1)