To replace a bulb:1. Turn off power at the circuit breaker orfuse box.2. Remove the freezer light shield bypulling the front edge down and freeand then pull it toward you.3. Replace with the same size bulb,reinstall the shield, and turn thepower on.To replace the freezer shield, set the backedge on the rear tabs and then push up inthe front until it rests in place.You may bend the shield slightly to help inremoval and replacement.19Light bulbreplacement inthe fresh foodcompartmentThere are upper and lower light bulbs inthe fresh food compartment.To replace a bulb:1. Turn off power at the circuit breaker orfuse box.2. Remove the light shield from the topfresh food light by pushing the front endup and pulling it toward you to release itfrom the rear retaining lip. (It may bendslightly.)To change the bottom refrigerator light,pull out the top drawer, look to the rear ofthe fresh food compartment and replacebulb as needed.3. Replace with the same size bulb,reinstall the shield for the upper freshfood light, and turn the power on.To reinstall the upper fresh food shield,hook the front edge first, then push it upand back until the shield rests in place.Care and CleaningBuilt - In RefrigeratorsLight bulbreplacement inthe freezercompartment