GE Monogram ZDBC240 Owner's Manual

Also see for monogram ZDBC240: Installation instructions Installation instructions Owner's manual Owner's manual Owner's manual

Controls and FeaturesBr,verag'e ( entr, r7>mpoatureconbvlTire operating temperatures of thebeverage center rang> flom tile low fortiesto tile mid fifties.Do not irrstal] tire beverage center wheretile temperature will go below 55°F (13°C)or above 90°F (32°C).As with arty refligeration product, there isa slight temperature variance at dirt>rentlocations within tile cabinet.Tile coolest area will be in tile lower partof tire cabinet.Tile cooler area will be in tile middlesection.Tile upper part of tile cabinet is tilewarmest section.When tire temperature is adjusted, allow24 honrs fox tile unit to stabilize.To set the control, turn it to tile midpointsetting (approximately 45°F). Once tilebeverage center is loaded, allow at least24 hours before making any adjustmentsto tile initial setting.OFFCOLDEST__ COOLIInterior lightand switchTile irrterior light makes it easy to viewyour beverage labels arrd enhances tiledisplay of vonr collection.When tire switch is ira tile OFF position,tile light comes on only when tile dooris opened. When tire switch is in tire ONposition, tire light remains on continuouslyfox your maximuna viewing pleasure. Foxbest viewing, do not store a bottle ontire top shelf directly under the light.Remember to turn off tile light whenit is no longer needed.Glass shelves Tempered glass shelves in tile beveragecenter unit are removable for easycleaning or for storing larger items.To remove a shelf, open tire doorcompletely to avoid pomntial damage totire gasket. Lift up on tile back of tire shelfslightly. Tilt tire shelf to one side at anarrgle while pulling forward.To replace a shelf, open tire doorcompletely to avoid potential damageto tire gasket. Tilt the shelf m one sideat an angle arrd slide toward tile back wall,placing one side onto tire shelf support.Place tire other side onto tile oppositeshelf support. Ensure rear locking tabsare engaged. When installed properly,tire shelf will not slide forward whengently pu]led.To remove, lift up on the back of the shelf Tiltthe shelf at an angle while removingor replacingPlace in slots when replacing the shelf