10Glass shelves Tempered glass shelves in the outdoor/indoor refrigerator are removable for easycleaning or for storing larger items.To remove a shelf, open the doorcompletely to avoid potential damage tothe gasket. Lift up on the back of the shelfslightly. Tilt the shelf to one side at an anglewhile pulling forward.To replace a shelf, open the doorcompletely to avoid potential damageto the gasket. Tilt the shelf to one side atan angle and slide toward the back wall,placing one side onto the shelf support.Place the other side onto the oppositeshelf support. Ensure rear locking tabs areengaged. When installed properly, the shelfwill not slide forward when gently pulled.To remove, lift up on the backof the shelfTilt the shelf at an angle whileremoving or replacingPlace in slots when replacingthe shelfQuickSpace ™ShelfThis shelf splits in half and slides under itselffor storage of tall items on the shelf below.Step 1: Lift the back edge of the front halfof the shelf.Step 2: Pull slightly forward.Step 3: Lower the back edge of the fronthalf of the shelf while sliding it underneaththe back half.The entire Quick Space shelf can beremoved and replaced (see Glass Shelvessection).Step 3Step 1Step 2Controls and FeaturesOutdoor/Indoor RefrigeratorAppearance may vary