GE Monogram ZEU36K Owner's Manual

Also see for Monogram ZEU36K: Installation instructions Installation instructions Installation instructions Installation instructions Owner's manual

Contents

Glass Cooktop CleaningRadiant CooktopBurned-onresidue WARNING: DAMAGE to your glasssurface may occur if you use scrub pads otherthan the pad included with your cooktop.AVERTISSEMENT :Vous pouvez ENDOMMAGER la surface envitrocéramique si vous utilisez un tampon derécurage autre que celui fourni avec votre tablede cuisson.1. Allow the cooktop to cool.2. Spread a few drops of CERAMA BRYTE®Ceramic Cooktop Cleaner on the entireburned residue area.3. Using the included CERAMA BRYTE®Cleaning Pad for Ceramic Cooktops, rub theresidue area, applying pressure as needed.4. If any residue remains, repeat the steps listedabove as needed.5. For additional protection, after all residuehas been removed, polish the entire surfacewith CERAMA BRYTE® Ceramic CooktopCleaner and a paper towel.Normal dailyuse cleaningONLY use CERAMA BRYTE® Ceramic CooktopCleaner on the glass cooktop. Other creams maynot be as effective.To maintain and protect the surface of your glasscooktop, follow these steps:1. Before using the cooktop for the first time,clean it with CERAMA BRYTE® CeramicCooktop Cleaner. This helps protect the topand makes cleanup easier.2. Daily use of CERAMA BRYTE® CeramicCooktop Cleaner will help keep the cooktoplooking new.3. Shake the cleaning cream well. Apply a fewdrops of CERAMA BRYTE® Ceramic CooktopCleaner directly to the cooktop.4. Use a paper towel or CERAMA BRYTE®Cleaning Pad for Ceramic Cooktops to cleanthe entire cooktop surface.5. Use a dry cloth or paper towel to remove allcleaning residue. No need to rinse.NOTE: It is very important that you DO NOT heatthe cooktop until it has been cleaned thoroughly.Clean your cooktop after eachspill. Use CERAMA BRYTE ®Ceramic Cooktop Cleaner.Use a CERAMA BRYTE® CleaningPad for Ceramic Cooktops.Heavy,burned-onresidue1. Allow the cooktop to cool.2. Use a single-edge razor blade scraper atapproximately a 45° angle against the glasssurface and scrape the soil. It will benecessary to apply pressure to the razorscraper in order to remove the residue.3. After scraping with the razor scraper, spreada few drops of CERAMA BRYTE® CeramicCooktop Cleaner on the entire burned residuearea. Use the CERAMA BRYTE® Cleaning Padto remove any remaining residue.4. For additional protection, after all residuehas been removed, polish the entire surfacewith CERAMA BRYTE® Ceramic CooktopCleaner and a paper towel.The CERAMA BRYTE ® Ceramic CooktopScraper and all recommended supplies areavailable through our Parts Center. Seeinstructions under “To Order Parts” sectionon next page.NOTE: Do not use a dull or nicked blade. 17