GE Monogram ZFSB25DSS Installation Instructions Manual

Installation Instructions[STEP 1 ]MOVE REFRIGERATORINDOORSIMPORTANT:the installation location require a 36" rain. oi)ening., Ifthe opening is less than 36", the top cap and doors mustbe i'ei//o_ ed.NOTE: Skip this step if door remoxal is not required.See instHlctions on next page, "To Mo_e TheRefrigerator Indoors."NOTE: To prevent damage, leave insidepackaging, door spacer and outsideprotective wrap in place until the refit ismoved to the installation location.REMOVE THE DOORSThe top cap must be removed to access hinges. It is bestto I'eIl/OVe one door at a time.A. Remove 2 screws and springs on top of therefrigerator; one on each side. Push the top capforward and litt up fl'om the rear.B. Remove 2 screws holding the top filler strip, lilt off.C. Open both doors. Renlove the 2 toekick screws andpull fi)rward to I'elllOVe.D. Disconnect the water line coupler by pushing againstthe collar on the leti side. Disconnect wire harness.E. Remove 2 screws holding top hinge to the case.Careflfll> lilt off door.Follow the same procedure to remove the fresh fooddoor.A/Wire Harness Water Line Coupler5