GE Monogram ZGU384L Owner's Manual

Also see for Monogram ZGU384L: Installation instructions Owner's manual Installation instructions Installation instructions

Contents

GE Monogram ZGU384L Owner's Manual Manual pdf 13 page image

13Care and CleaningGas CooktopDual-flamespill-proofburners (cont.)To remove the burner parts:1. Turn all controls OFF before removing anyburner parts.2. When cool, you may lift off the burner grates,burner caps and burner heads for easiercleaning. Do not remove the burner bases.To replace the burner parts:Make sure that the burner parts are replaced inthe correct location.On model ZGU384, there is one large burnerhead and burner cap and three sets of mediumburner heads and burner caps.On model ZGU385, there is one large burnerhead and burner cap and four sets of mediumburner heads and burner caps.These burner parts are not interchangeable.1. Replace the burner head on top of the burnerbase, making sure that the hole in the burnerhead is properly aligned with the electrode inthe burner base. A small gap between thebase and head is normal.2. Place the burner cap on top of the burnerhead. Make sure that the burner cap isproperly seated on the burner head.MediumBurnerLargeBurnerMediumBurnerMediumBurnerMediumBurnerMediumBurnerMediumBurnerMediumBurnerBurner headBurnerbaseElectrodeBurner capBurner cap not properly seatedBurner cap properly seatedNOTE: Before removing the burner parts,remember their size and location. Replacethem in the same location after cleaningfor proper burner operation.LargeBurnerBurner AssemblyBurner Cap Alignment