GE Monogram ZHU30RSR Dimension Manual

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atgeappliances.com or call GE Answer Center®service, 800.626.2000.130257Specification Revised 9/10Listed byUnderwritersLaboratoriesZHU30RSRGE Monogram® 30" Electric Induction CooktopDimensions and Installation Information (in inches)Cutout Dimensions:30" Models A B C DZHU30RSR 29-3/4" 21-3/8" 28-1/2" 19-5/8"269Dia1AC2" Min.to Side WallsB2-1/2"Min.to FrontEdge1-3/4"Min.D269Dia23-1/4" 6-1/4"5-1/2"557ZEU66916" MinJunctionBoxCombination installationsConsideration must be given to electrical supply locationswhen the cooktop is installed with other products in the samecabinet. Always refer to each product's installation instructionsfor clearances and electrical requirements.• Install these cooktops with any exhaust hood of the sameor treater width; 300 CFM or greater air flow rating isrecommended.• Install the 36" cooktop with a 36" downdraft vent. Seedowndraft vents for details.• A Monogram single oven (except Trivection oven) may beinstalled below these cooktops.The serial plate is located on the bottom of the cooktops.Electrical requirementsProduct rating is 120/240V, 60Hz, 36" cooktopsto a 50-amp circuit; and 30" cooktops to a 40-amp circuit. The cooktops must be connectedto a supply circuit of the proper voltage andfrequency and protected by a time-delay fuse orcircuit breaker.All models require 12" minimum clearance belowthe cooktop bottom to combustible materials.

/ 2

Related manuals for GE Monogram ZHU30RSR