GE Monogram ZSC1201NSS Dimensions And Installation Information

Also see for Monogram ZSC1201NSS: Owner's manual

Contents

warming drawer

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.130316Specification Created 11/08Listed byUnderwritersLaboratoriesZSC1201NSS/ZSC1202NSSGE Monogram® Built-In Advantium® 120 Oven30"23-1/2"Construct BaseMin. 3/8"PlywoodSupported by2 x 4 or 2 x 2Runners allFour Sides17-1/2"530Dia325-1/4"Single Advantium 120V installation• Allow 2-1/8" case trim overlap on the sides and 7/8"overlap on the bottom. Allow 1-1/8" overlap at the topof the oven.Installation over a MonogramWarming DrawerAdditional clearances between the cutouts may berequired. Check to be sure the oven supports above thewarming drawer do not obstruct the required interiordepth and height. See warming drawer installationinstructions for details.30" 23-1/2" Construct SolidBottom Min. 3/8"PlywoodSupported by2 x 4 or 2 x 2Runners allFour Sides2" Min.Per WarmingDrawerRequirement25-1/4"17-1/2"30" 23-1/2" Construct SolidBottom Min. 3/8"PlywoodSupported by2 x 4 or 2 x 2Runners, allFour Sides2" Min.Per OvenRequirement17-1/2"25-1/4"Installation over a Monogram OvenAdditional clearances between the cutouts may berequired. See oven installation instructions for details.30" 23-1/2"17-1/2"Construct SolidBottom Min. 3/8"PlywoodSupported by2 x 4 or 2 x 2Runners allFour Sides2" Min.Per OvenRequirement2" Min.Per warming drawer requirement25-1/4"Installation over a Monogram Oven andWarming DrawerAdditional clearances between the cutouts may berequired. See warming drawer and oven installationinstructions for details.Important: These installation cutouts do not include the accessory drawer.Dimensions and Installation Information (in inches)

/ 4

Related manuals for GE Monogram ZSC1201NSS