Specification Created 11/07 130675ZV830SMGE Monogram® 30" Wall-Mounted Vent Hood*HeighttoCeiling29-7/85-7/813-1/410-7/818-7/8*The Supplied Duct Cover Fits 8' to 10' Ceiling Heights.This vent hood is designed to be installed on a walland vented to the outdoors, or it can be installed forrecirculating operation. All necessary parts for recirculatingoperation are supplied with the hood. No kits required. Mustuse an 8" round duct, not supplied with product.A decorative duct cover is provided to enclose the ductfrom the top of the hood to a 8' to 10' ceiling.Accessories:An optional stainless steel duct cover is available for12' ceiling heights. Order ZX83012 optional duct coverat the same time as the vent hood and have on sitebefore installation.For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.Dimensions and Installation Information (in inches)Listed byUnderwritersLaboratoriesDimensions and Clearances:The vent hood should be installed 24" min. and 30" max.above the cooking surface. The cooking surface should be atleast 36" above the floor. Installation will be easier if the venthood is installed before the range or cooktop/countertopis installed.This hood can be installed over a Monogram electric or gascooktop. It cannot be installed over a Monogram professionalcooktop or range.Installation Information: Before installing, consultinstallation instructions packed with product or availableon monogram.com for current dimensional data. 24” Min.30” Max.