18Questions?Use thisproblemsolverPROBLEM POSSIBLE CAUSE WHAT TO DOSpots and filming on Extremely hard water • Use a rinse agent to reduce spotsglasses and flatware and prevent new film buildup.Low inlet water • To remove stubborn spots on glassware:temperature 1 Remove all metal utensils from theOverloading the dishwasher dishwasher.Improper loading 2 Do not add detergent.Old or damp powder 3 Select the NORMAL WASH cycledetergent and HEATED DRY option.Rinse agent dispenser 4 Start the dishwasher and allow to runempty until the main wash.Too little detergent 5 Open the door and pour 2 cups(500 ml) of white vinegar into thebottom of the dishwasher.6 Close the door and allow to completethe cycle. If vinegar rinse doesn’twork: Repeat as above, except use1/4 cup (60 ml) of citric acid crystalsinstead of vinegar.Cloudiness on Combination of soft • This is called etching and is permanent.glassware water and too much To prevent this from happening, use lessdetergent detergent if you have soft water. Washglassware in the shortest cycle that willget them clean.Extended exposure • Lower the water heater temperature toto high-temperature 120°F.waterBlack or gray marks Aluminum utensils have • Remove marks with a mild, abrasiveon dishes rubbed against dishes cleaner.Dishes do not dry HEATED DRY • Depending on Model, select HEATEDnot selected DRY.Rinse agent dispenser is • Check the rinse agent dispenser.emptyDishwasher is paused • To restart the wash cycle, press theselected wash button.Low inlet water • Run tap until water is hot prior to startingdishwasher cycle.• Assure inlet water temperature is at least120°F.• Select ADDED HEAT HI TEMP andHEATED DRY options.Before You Call For ServiceDishwasher