14 49-80765-2USING THE RANGE: Oven Racks Oven RacksRecommended rack positions for various types offoods are provided in the Cooking Guide. Adjustingrack position is one way to impact cooking results. Forexample, if you would prefer darker tops on cakes,muffins, or cookies, try moving food one rack positionhigher. If you find foods are too brown on top try movingthem down next time.When baking with multiple pans and on multiple racks,ensure there is at least 1½" between pans to allowsufficient space for air to flow.flat racks.To avoid possible burns, place the racks in the desiredposition before you turn the oven on.Extension RacksAlways pull the rack out by its upper front rail to its fullyopen position, when placing or removing cookware.If extension racks are difficult to extend, lubricate theracks with the graphite lubricant provided with youroven. Remove the rack from the oven, remove debris inthe side tracks with a paper towel, shake the graphitelubricant and place 4 small drops on the two bottomtracks of the left and right sides. Open and close therack several times to distribute the lubricant.To order additional graphite lubricant, read theAssistance and Accessories section at the beginning ofthe manual.To Remove An Extension Rack:1. Make sure the rack is pushed all the way into theoven so that side paddles on the rack disengage fromthe oven support. 6OLGHWKHUDFNWRZDUG\RXWRWKHEXPS VWRSSRVLWLRQ on the rack support.3. Firmly grasp both sides of the rack frame and thesliding rack, tilt the front end up and pull it out.To Replace An Extension Rack:1. Firmly grasp both sides of the rack frame and thesliding rack. 3ODFHWKHFXUYHGHQGRIWKHUDFN VWRSORFNV RQWRWKHoven supports, tilt up the front of the rack and push itin as far as it will go.If extension racks are difficult to replace or remove, wipeWKHRYHQUDFNVXSSRUWVZLWKFRRNLQJRLO'RQRWZLSHRLOon the rack slides.To Lubricate the Paddle:Shake lubricant and apply to the moving parts of thepaddle mechanisms as shown.The number of rack positions may vary by model.8SSHU)URQWRailFully Open PositionGrasp here
