10Installing the PhoneInstalling the Handset BatteryNOTE: You must connect the handset battery before using thecordless handset(s).CAUTION: To reduce the risk of fire or personal injury,use only the Thomson Inc. approved model GP80AAAHC - NiMH1.2V 800mAh rechargeable Nickel-metal Hydride battery, whichis compatible with this unit.1. Locate batteries and battery door which are packaged together inside a plasticbag and are separate from the handset.2. Locate the battery compartment on the back of the handset.3. Insert the batteries.4. Close the battery compartment by pushing the door up until it snaps into place.Base Station1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), andplace your cordless telephone on a level surface near your personal computer.System Requirements:Recommended: Minimum:1 GHz processor 400 MHz processor256 MB RAM 128 MB RAM30 MB free space on your hard drive 10M free disk space on your hard driveCable, DSL or equivalent broadband Internet Connection (either dial-up:connection to Internet minimum 33.6 Kbps modem,Standard landline (RJ-11) or any broadband: cable, DSL, etc.)PC running Windows2000,XP or Vista PC running Windows2000,XP or Vista