GE PT7050 Owner's Manual

Also see for PT7050: Owner's manual Owner's manual Technical service guide Owner's manual Owner's manual

Contents

GE PT7050 Owner's Manual Manual pdf 12 page image

12 49-80697-1Oven RacksUSING THE OVEN: Oven RacksYour oven has six rack positions. Recommended rackpositions for various types of foods are provided in theCooking Guide. Adjusting rack position is one way toimpact cooking results. For example, if you would preferdarker tops on cakes, muffins, or cookies, try movingfood one rack position higher. If you find foods are toobrown on top try moving them down next time.When baking with multiple pans and on multiple racks,ensure there is at least 1½" between pans to allowsufficient space for air to flow.Oven RacksYour oven may have extension racks and/or traditionalflat racks.To avoid possible burns, place the racks in the desiredposition before you turn the oven on.Extension RacksExtension racks have an install feature that locks into therack supports (guides) on both sides. Once the installfeature is locked into place, always pull the rack out,by its upper front rail, to its full extension stop position,when placing or removing cookware.If extension racks are difficult to extend, lubricate theracks with the graphite lubricant provided with youroven. Remove the rack from the oven, remove debris inthe slide tracks with a paper towel, shake the graphitelubricant and place 4 small drops on the two bottomtracks of the left and right sides. Open and close therack several times to distribute the lubricant.To order additional graphite lubricant, read theAssistance and Accessories section at the beginning ofthis manual.To Remove An Extension Rack:1. Make sure the rack is pushed all the way into theoven.2. Grasp the rack by both its upper front rail and itslower handles on two sides and lift straight up tounlock the rack from the rack supports.3. Firmly holding onto both the upper front rail and lowerhandles on both sides, pull the rack forward. Grasp therack on both sides if necessary. Then remove it fromthe oven.To Replace An Extension Rack:1. Place the rear portion of the rack onto the racksupports (guides) as shown in the picture.2. Hold the upper front rail and lower handles and pushthe rack all the way in until the install feature locksinto the front rack support.If extension racks are difficult to replace or remove, wipethe oven rack supports with cooking oil. Do not wipe oilon the rack slides.The ovenhas 6 rackpositionsUpper Front RailHandleHandleHandleHandle Upper Front RailLift to unlockfrom the racksupportInstall FeatureFront RackLockHold the upper front rail and lowerhandles and push the rack all theway in until the install feature lockson the fron supportUpper Front Rail