GE PVM1899 Installation Instructions Manual

Also see for PVM1899: Owner's manual

Contents

GE PVM1899 Installation Instructions Manual Manual pdf 7 page image

Installation Instructions6Appliance dimensions Power RequirementsThe outlet must be properly grounded in accordance withall applicable codes.It can be installed inside the cabinet above the appliance.Electrical InstallationElectrical Requirements:• a three prong grounded outlet• 120 V, 60 Hz, AC only• 20 Amp electrical supply with a fuse or a circuit breakerThis product must be connected to a supply circuit of theproper voltage and frequency. Wire size must conform to therequirements of the National Electric Code or the prevailinglocal code for this rating. The power supply cord and plugshould be brought to a separate 20-amp branch circuitsingle grounded outlet. The outlet box should be locatedinside the cabinet above the appliance (see section LocationRequirements). The outlet box and supply circuit should beinstalled by a qualified electrician and conform to the NationalElectrical Code or the prevailing local code.The voltage used must be the same as specified on thismicrowave oven. Using a higher voltage is dangerous andmay result in a fire or oven damage. Using a lower voltagewill cause slow cooking. The dealer is not responsible for anydamages resulting from the use of the oven with any voltageother than specified.29-7/8"(760mm) 15-3/8"(390mm)16-1/2"(419mm)