Automatic IcemakerThe icemaker will produce seven cubesper cycle—approximately 100–130 cubesin a 24-hour period, depending on freezercompartment temperature, roomtemperature, number of door openingsand other use conditions.For Non-LCD Models: If the refrigeratoris operated before the water connectionis made to the icemaker, press and releasethe ICE OFF/LOCK pad on the control panelto disengage the icemaker.When the refrigerator has been connectedto the water supply, press and releasethe ICE OFF/LOCK pad on the controlpanel to engage the icemaker.For LCD Models: If the refrigerator isoperated before the water connection ismade to the icemaker, see ICEMAKER underthe Screen Functions of LCD Operationssection and follow the screen commandsto turn the icemaker OFF.A newly installed refrigerator may take12 to 24 hours to begin making ice cubes.You will hear a buzzing sound each timethe icemaker fills with water.Throw away the first few batches of ice toallow the water line to clear.Be sure nothing interferes with the sweepof the feeler arm.When the bin fills to the level of the feelerarm, the icemaker will stop producing ice.It is normal for several cubes to be joinedtogether.If ice is not used frequently, old ice cubes willbecome cloudy, taste stale and shrink.NOTE: In homes with lower-than-averagewater pressure, you may hear the icemakercycle multiple times when making one batchof ice.NOTE: If the water supply is shut off,press and release the ICE OFF/LOCK padon the control panel of the non-LCD model.For the LCD model, see ICEMAKER underthe Screen Functions of LCD Operationssection and follow the screen commandsto turn the icemaker OFF.A newly installed refrigerator may take 12 to 24 hours to begin making ice.(Hold 3 secto Lock Control)ICE O FF/L OCK20About the automatic icemaker.Consumer Support Troubleshooting Tips Operating Instructions Safety InstructionsInstallationInstructions