GE Profile Advantium PSB1000N Dimensions

Also see for Profile Advantium PSB1000N: Owner's manual Installation instructions

Contents

installation information

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.Advantium wall oven/GE Profile cooking tower dimensions and cabinet installation information (in inches)Note: Cabinetsinstalled adjacentto wall ovens musthave an adhesionspec of at least a194°F temperaturerating.Note: 2" minimumbetween cutoutswhen installedabove warmingdrawer or singlewall oven.InstallationInformation:Before installing,consult installationinstructions packedwith product for currentdimensional data.Specification Created 11/08 240443Listed byUnderwritersLaboratoriescooking_tower_solid_floor.epsCL(Must support 130 lbs.)2 x 4’s orequivalentsolid floorSuitablebracingto supportrunners21-5/8"over centerlineof cabinetA=Allow 1” overlap of oven over top and bottom edges of cutout.B=Allow 11/16”-3/4” for overlap of oven over side edges of cutout.A=Allow 1” overlap of oven over top and bottom edges of cutout.B=Allow 11/16”-3/4” for overlap of oven over side edges of cutout.PSB1000NBB/WWGE Profile Advantium® 120 Volt - 27" Wall OvenCabinetWidth WWidth HHeight DDepth(excludinghandle)XCutoutWidthYCutoutHeightZCutoutDepthminimumPSB1000/1:27"Installation 27 26-3/4 19-1/32 21-1/2 25-1/4 17-1/2 23-1/2Cutout widthXcabinetwidthRequiredcutout location36-3/4"minimumfrom floorJunction boxlocation(240-voltmodels only)A=Allow 7/8" overlap of oven over bottom edge of cutout, and allow1-1/4” overlap at top edge of cutout.B=Allow 2-1/8" for overlap of oven over side edges of cutout.*Required for UL approval.4-3/16YCutout heightA BZCutout depthWHAdvantium Wall Oven Dimensions (in inches)andCabinet Installation (in inches)Note: Cabinets installed adjacentto wall ovens must have an adhesionspec of at least 194° F temperature rating.Construct SolidBottom Min.3/8" PlywoodSupported by2 x 4 or 1 x 2Runners, allFour Sides.(Must Support150 lbs.)Conduit(48-1/2"long)D*adv_240_120_cooktower_dia.eps1" Min. above toekick or adjustto oven installation height2" MIN between cutouts3" MIN between cutoutsrecommended—2" MIN required9-1/4" cutout height28-1/2" cutout widthJunction box locationA BA B Construct Solid BottomMIN 3/8" Plywood Supported by2 x 4 or 1 x 2 Runners, all Four Sides.(Must Support 150 lbs. for Advantium)(Must Support 200 lbs. for Wall Oven)4-3/16DExcludingHandleHWConduit(46" long)Cabinet width(240-volt models only)

/ 2

Related manuals for GE Profile Advantium PSB1000N