GE Profile Advantium SCA1000D Owner's Manual

Also see for Advantium 120 SCA1000: Owner's manual Owner's manual Owner's manual Technical service guide

Care and Cleaningwww.geadvantium.com1. To replace the cooktop light/night light, first disconnect thepower at the main fuse or circuitbreaker panel.2. Remove the screw from theside of the light compartmentcover and lower the cover untilit stops.3. Be sure the bulb to be replaced iscool before removing. Gently pullthe bulb from the receptacle.Replace with 20-watt (max.) 12 volthalogen bulb. Order WB36X10176 fromyour GE supplier. High-intensity 20-wattbulbs, available in supermarkets andhardware stores, may also be used forreplacements.4. Raise the light cover and replacethe screw. Connect electricalpower to the oven.Remove screwCooktop light/night lightThe metal filters trap grease releasedby foods on the cooktop. They alsoprevent flames from foods on thecooktop from damaging the insideof the oven.For this reason, the filters mustalways be in place when the hoodis used. The vent filters should becleaned once a month, or as needed.To remove, slide them to the rearusing the tabs. Pull down and out.To clean the vent filters, soak themand then swish around in hot waterand detergent. Don’t use ammoniaor ammonia products becausethey will darken the metal. Lightbrushing can be used to removeembedded dirt.Rinse, shake and let dry beforereplacing.To replace, slide the filters into theframe slots on the back of eachopening. Press up and to the frontto lock into place.Reusable ventfiltersRemoving andcleaning thefilters41