GE Profile GCL22QGT Owner's Manual And Installation Manual

Also see for 25: Owners and installation manual Owner's manual Owner's manual Use and care & installation guide Use and care & installation guide

Contents

28LEVEL THE REFRIGERATOR(cont.)To adjust therollers on 23‘/25‘CustomStyle™models:Turn the front rolleradjusting screwsclockwise to raisethe refrigerator,counterclockwiseto lower it. Use a 3/8″ hex wrench withextension, or an adjustable wrench.These models also have rear adjustablerollers so you can align the refrigeratorwith your kitchen cabinets. Use a 3/8″ hexwrench with extension to turn the screwsfor the rear rollers—clockwise to raise therefrigerator, counterclockwise to lower it.Installation InstructionsINSTALLING THE REFRIGERATOR (CONT.)PUT THE REFRIGERATORIN PLACEMove the refrigerator to its final location.4 5LEVEL THE REFRIGERATORThe refrigerator can be leveled byadjusting the rollers located near thebottom hinges.Rollers have three purposes:• Rollers adjust so the door closes easilywhen opened about halfway. (Raise thefront about 5/8″ [16 mm] from the floor.)• Rollers adjust so the refrigerator isfirmly positioned on the floor and doesnot wobble.• Rollers allow you to move therefrigerator away from the wall forcleaning.To adjust the rollers on 23‘ (33” wide),25‘, 26‘, 27‘ and 29‘ models:• Turn the rolleradjusting screwsclockwise toraise therefrigerator,counterclockwiseto lower it. Usea 3/8″ hex socketor wrench, oran adjustablewrench.5RollersRoller adjusting screwRoller adjusting screwsLEVEL THE DOORSAdjust the refrigerator door to make thedoors even at the top.To align:Using a 7/16″ wrench, turn the dooradjusting screw to the right to raise thedoor, to the left to lower it.NOTE:A nylon plug, imbedded in the threadsof the pin, prevents the pin from turningunless a wrench is used.After one or two turns of the wrench,open and close the refrigerator door andcheck the alignment at the top of the doors.6ABDoors should be even at topRaise7/16″ wrenchRaise