GE Profile Harmony PTDN805EM Owner's Manual And Installation Instructions

Also see for Profile Harmony PTDN800EM: Dimensions and installation information

CONNECTING A GAS DRYER (cont.)Installation Instructions20TEST FOR LEAKSWARNING – Never use an openflame to test for gas leaks.Check all connections for leaks with soapy solutionor equivalent.Apply a soap solution. The leak test solution mustnot contain ammonia, which could cause damageto the brass fittings.If leaks are found, close the valve, retighten the jointand repeat the soap test.Open GasValveELECTRICAL CONNECTIONINFORMATION FOR GAS DRYERSWARNING – To reduce the risk offire, electric shock and personal injury:• Do not use an extension cord or an adapter plugwith this appliance.• The dryer must be electrically grounded inaccordance with local codes and ordinances, orin the absence of local codes, in accordance withthe NATIONAL ELECTRICAL CODE, ANSI/NFPANO. 70.ELECTRICAL REQUIREMENTSFOR GAS DRYERSThis appliance must be supplied with 120V, 60Hz,and connected to a properly grounded branchcircuit, protected by a 15- or 20-amp circuitbreaker or time-delay fuse.If electrical supply provided does not meet theabove specifications, it is recommended that alicensed electrician install an approved outlet.WARNING – This dryer isequipped with a three-prong (grounding) plug foryour protection against shock hazard and shouldbe plugged directly into a properly groundedthree-prong receptacle. Do not cut or removethe grounding terminal from this plug.Ensure properground existsbefore use.