GE Profile JB968SL Dimension Manual

†Note: Check local codes for required breaker size.Effective January 1, 1996, the National Electrical Code requiresthat new construction (not existing) utilize a 4-conductorconnection to an electric range.Receptacle Locations: Locally approved flexible service cordor conduit must be used because terminals are not accessibleafter range installation. See shaded area in drawing for locationof electrical outlet box. Recommended outlet locations allowrange to be installed directly against wall.Note: 30" ranges conform to U.L. requirements for 0" spacingfrom adjacent walls below countertops. To reduce possibilityof scorching walls, engineering recommends a minimum of1-1/2" spacing to allow for possible extended, high-heat,no-load heating element operation.Installation Information: Before installing, consult installationinstructions packed with product for current dimensional data.Dimensions and Installation Information (in inches)For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.JB968SLGE Profile™ 30" Free-Standing Double Oven RangeListed byUnderwritersLaboratoriesAll GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.Specification Created 4/06 221097KW Rating240V 14.2208V 10.7Breaker Size40 Amps †3025A*B*2-1/27-1/225-3/8*47-5/82-1/2Acceptable electricaloutlet area30_install_fse_drawer.eps714-1/2On models with baking or warmingdrawers, electrical outlet must notbe in this area.*Dimension from wall to front of closedoven door handle is 27-3/8 on modelsJB968/910/900 and 27-3/4 on modelsJBP89/84/81.*A is 29-7/8 on models JB968/910/900and JBP89/84/81*B is 46-7/8 on models JBP89/84/81and 46-1/2 on models JB968/910/900

/ 2

Related manuals for GE Profile JB968SL