GE Profile JKP56AAAA Dimension Manual

JKP56AAAA - GE Profile™ 27" Double Wall OvenTMSpecification Revised 6/99Dimensions (in inches)10Locatejunction boxfor 27"modelseither 5" MIN.below cutoutfloor or 56"MIN. abovecutout floorAllow 3/4"for overlapover all edgesof cutoutARecommendedcutout locationfrom floorDE2" X 4" orequiv. runners(cutout floor) 20" MIN.door openingallowanceBCHFGLocatejunction boxfor 24"models56" MIN. abovecutout floorConduit(49" longJK950,JKP56/45/27,48-1/2" longJRP24)Cut Openingin SolidBottom10Note: If a solidbottom is usedinstead of therunners, a 6" x 10"rectangle must becut out of thebottom for optimumperformanceand proper aircirculation.66RListed byUnderwritersLaboratoriesFor answers to your Monogram,®GE Profile Performance Series,™GE Profile™ or GE appliance questions, callGE Answer Center® service, 800.626.2000.Installation Information: Before installing, consult installation instructions[Pub. No. 31-10200] packed with product for current dimensional data.Cabinet JKP56A – Cabinet Width Required 27" minB – Minimum Cabinet Depth 23-5/8"C – Minimum Opening Width 25"D – Opening Height 49-1/2" min.E – Minimum Cutout Location from Floor 13-1/4"OvenF – Overall Depth 23-5/8"G – Overall Height 51-1/8"H – Overall Width 26-5/8"Note: Cabinets installed adjacent to wall ovens must have an adhesion specof at least 194°KW Rating240V 6.8208V 5.1Breaker Size30 Amps††Note: Check local codes for required breaker size.

/ 2

Related manuals for GE Profile JKP56AAAA