GE Profile JGP970 Owner's Manual

Also see for JGP970: Installation instructions Owner's manual Owner's manual Installation instructions Installation instructions

Contents

Care and cleaning of the cooktop. GEAppliances.comBe sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.How to Remove Protective Shipping Film and Packaging TapeCarefully grasp a corner of the protectiveshipping film with your fingers and slowly peelit from the appliance surface. Do not use anysharp items to remove the film. Remove all ofthe film before using the appliance for the firsttime.To assure no damage is done to the finish ofthe product, the safest way to remove theadhesive left from packaging tape on newappliances is an application of a householdliquid dishwashing detergent. Apply with a softcloth and allow to soak.NOTE: The adhesive must be removed fromall parts before using the cooktop. It cannot beremoved if it is baked on.Control KnobsThe control knobs may be removed for easiercleaning.Make sure the knobs are in the OFF positionsand pull them straight off the stems forcleaning.The knobs can be cleaned in a dishwasher orthey may also be washed with soap and water.Make sure the insides of the knobs are drybefore replacing.Replace the knobs in the OFF position toensure proper placement.Pull the knob straight up off the stem.Porcelain Enamel Cooktop (on some models)The porcelain enamel finish is sturdy butbreakable if misused. This finish is acid-resistant. However, any acidic foods spilled(such as fruit juices, tomato or vinegar) shouldnot be permitted to remain on the finish.If acids spill on the cooktop while it is hot, usea dry paper towel or cloth to wipe it up rightaway. When the surface has cooled, wash withan all-purpose cleaner and water. Rinse well.For other spills such as fat spatterings, wash withsoap and water or an all-purpose cleaner afterthe surface has cooled. Rinse well. Polish with adry cloth.Do not use a steel wool pad; it will scratch thesurface.To clean the stainless steel surface, use warmsudsy water or a stainless steel cleaner orpolish. Always wipe the surface in the directionof the grain. Follow the cleaner instructions forcleaning the stainless steel surface.To inquire about purchasing stainless steelappliance cleaner or polish, or to find thelocation of a dealer or Camco Parts Storenearest you, please call our toll-free number:National Parts Center 1.800.626.2002 (U.S.)1.800.661.1616 (Canada)GEAppliances.com (U.S.)www.GEAppliances.ca (Canada)Stainless Steel Surfaces (on some models)7